Bio Limousin Moteur de recherche

ponents. 3 Remove the side access panel. Depending on the manufacturer of your computer, you may need to remove one or two screws from the back of the computer tower to remove the side access panel. Refer to your manual for specific instructions. 4 Set the jum pers on your hard drive to the Slave setting. This will configure your hard drive to run as a secondary drive. Jumper settings can vary from manufacturer to manufacturer. Refer to the manual that was included with your hard drive for proper jumper settings. So book icon me hard drives have the jumper settings listed on a label applied directly to the hard drive housing.If you are installing a SATA hard drive, it will automatically configure itself upon startup, so no jumper adjustments are necessary. 5 Insert your second hard Bio Limousin Moteur de recherche drive into the hard drive bay inside your tower. Leave as much space as possible between your existing hard drive and your new on .

nto the bay. However, not all hard drive bays allow for use of rails. You may have to attach the hard drive to the bay using the s crews included with your drive. Refer to the user manual for your computer for specific information on your hard drive bay. 6 Conn ect the power supply cable and interface cable to the corresponding ports in the back of the hard drive. IDE hard drives use a fla t ribbon interface cable that has a secondary port built-in to allow two devices to be connected to the same cable, then connected marketing plan template to the IDE interface port on your motherboard. With SATA hard drives, an individual cable is required for each hard drive. Each c able must be attached from the hard drive to a SATA port in your motherboard.If your computers power supply does not have SATA pow Bio Limousin Moteur de recherche er cords, an adapter that converts the IDE power cord to SATA is available and, depending on the manufacturer, may even be supplie .

sign it a new drive designation letter.1 Move your wireless router off the floor and away from the walls. These structures can int erfere with your wireless signal. 2 Decrease interference from devices like microwaves and cell phones by keeping your router as f ar away from them as possible. Other routers may cause interference as well. If a neighbor in an adjacent house or apartment has h is router in a particular part of his house, position your router far away from it. 3 Move your laptop closer to your wireless rou rough texture ter. By doing so, you will minimize interference and signal blockages caused by structures and other electronic devices. 4 Attach a signal booster to your wireless router. This device may help to improve the range of your signal and make your connection strong Bio Limousin Moteur de recherche er. 5 Update the drivers for your network adapter card and your router. If your drivers are out of date, this can significantly af .

Bio Limousin Moteur de recherche | Bio Limousin Moteur de recherche | Bio Limousin Moteur de recherche | Bio Limousin Moteur de recherche