Bio Limousin Moteur de recherche

network cable. 2 Use a Phillips-head screwdriver to remove the two screws at the back of both side covers. Slide the covers back a nd away from the computer. 3 Unplug the power connector on the back of the hard drive. The power connector is the small, four-wire connector that is connected to the back of the hard drive. 4 Carefully remove the IDE data cable from the hard drive. The cable p lug has a tab on it that fits into a slot on the hard drive. 5 Use the Phillips-head screwdriver to remove the two screws on each scarsdale diet side of the hard drive that secure it in the drive bay. Slide the hard drive back and out of the case. 6 Slide the new drive into the bay. Line up the holes in the drive with the holes in the bay and install the four screws. 7 Carefully plug the IDE cable into Bio Limousin Moteur de recherche the back of the hard drive. Plug the power cable into the back of the drive. Install the side covers and secure it with the screw .

gn has two side covers, remove both. Some cases use screws, while others use a lever. 3 Remove the data and power cables from the Western Digital hard drive. 4 Remove the Western Digital hard drive from the computer case by removing the screws fastening it to the case, or by moving a lever inside of the case to release the hard drive from its locking position, depending on the computer c ase design.1 Plug your iBook directly into the 2Wire router with an Ethernet cord. Ensure that the Ethernet light on the 2Wire rou 3d modeling ter is on and check your IP address. If the IP address does not start with 192.168 you will need to contact technical support for assistance. 2 Open a browser like Safari and go to gateway.2wire.net. This will display the 2Wire routers graphical user interface Bio Limousin Moteur de recherche . Click on the Home Network icon. Click on the Edit settings button. Enter your password if prompted. 3 Review the SSID broadcast .

etwork name manually on any computers you wish to connect. If the encryption is off, anyone within range can connect to your netwo rk without a security key. 4 Click on the MAC Filtering button. Verify that the MAC filtering also matches your preferences. MAC f iltering allows you to define a list of specific devices that can use the wireless network. These devices must also have the corre ct security key to be able to use the network. Any computers you want to add to the network must have their MAC address added to t chalkboard font he list first.1 Right-click your Computer desktop icon and select Properties. Click the System Protection link in the window that opens. 2 Click the System Protection tab. Click the drive in the list of available system disks shown in the list box. Click the C Bio Limousin Moteur de recherche reate button. 3 Enter a name for the new restore point. This name is shown in your list of restore point files, so create a name t .

Bio Limousin Moteur de recherche | Bio Limousin Moteur de recherche | Bio Limousin Moteur de recherche | Bio Limousin Moteur de recherche